Weslo Pursuit 2.9 Bike Uk Manual - Page 5
Assembly
View all Weslo Pursuit 2.9 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires an adjustable wrench and pliers . Use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. M8 Locknut (46)-3 M8 Acorn Nut (35)-4 M8 Split Washer (59)-8 M8 Curved Washer (44)-8 M8 Washer (53)-3 M8 x 20mm Button Screw (51)-4 M8 x 75mm Carriage Bolt (16)-4 1. While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (7) to the Frame 1 with two M8 x 75mm Carriage Bolts (16), two M8 Curved Washers (44), two M8 Split Washers (59), and two M8 Acorn Nuts (35). M10 Washer (61)-1 35 59 44 7 35 59 44 1 16 5