Weslo Pursuit 2.9 Bike Uk Manual - Page 6

2. While another person lifts the front of the Frame 2 (1), attach the Front Stabilizer (6) to the Frame with two M8 x 75mm Carriage Bolts (16), two M8 Curved Washers (44), two M8 Split Washers (59), and two M8 Acorn Nuts (35). 16 3. Attach the Seat (4) to the Seat Carriage (28) with three M8 Washers (53) and three M8 3 Locknuts (46). Note: The Washers and Locknuts may be preattached to the under- side of the Seat. Set the Seat Carriage (28) on the Seat Post (34) and slide it to the desired position. Tighten the Seat Knob (20) and an M10 Washer (61) onto the Seat Carriage. Loosen and remove the Seat Post Knob (29). Then, insert the Seat Post (34) into the Frame (1). Align one of the adjustment holes in the Seat Post (34) with the indicated hole in the Frame (1). Insert the Seat Post Knob (29) into the Frame (1) and the Seat Post (34), and then tighten the Seat Post Knob. Make sure that the Seat Post Knob is inserted into one of the adjustment holes in the Seat Post. 6 44 59 35 1 44 59 35 4 53 46 34 Hole 29 1 53 46 28 61 20 6