Weslo Pursuit 310 Cs English Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench driver , and pliers . , Phillips screw- Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached. M8 Split Washer (42)-10 M8 Nylon Locknut (10)-4 M10 Nylon Locknut (33)-4 M4 x 16mm Screw (49)-4 M8 x 15mm Button Screw (34)-6 M10 x 65mm Carriage Bolt (30)-4 1. While another person lifts the front of the Frame (1) slightly, attach a Stabilizer (2) with two M10 x 65mm Carriage Bolts (30) and two M10 Nylon Locknuts (33). 1 30 2. While another person lifts the rear of the Frame (1) slightly, attach a Stabilizer (2) with two M10 x 65mm 2 Carriage Bolts (30) and two M10 Nylon Locknuts (33). 21 33 33 2 33 1 30 4