Weslo Pursuit 310 Cs English Manual - Page 9

FEATURES OF THE CONSOLE The easy-to-use console features five modes that provide instant exercise feedback during your workouts. The modes are described below. Speed-This mode displays your pedaling speed, in miles per hour or kilometers per hour. Time-This mode displays the elapsed time. Note: If you stop pedaling for a few seconds, the time mode will pause. Distance-This mode displays the distance you have pedaled, in miles or kilometers. Calorie-This mode displays the approximate number of calories you have burned. Scan-This mode displays the speed, time, distance, and calorie modes, for a few seconds each, in a repeating cycle. HOW TO OPERATE THE CONSOLE Make sure there are batteries in the console (see BATTERY REPLACEMENT on page 10). If there is a thin sheet of clear plastic on the console, remove it. Follow the steps below to operate the console. 1. To turn on the power, press the On/Reset button or begin pedaling. The entire display will briefly appear; the console will then be ready for use. 2. Select one of the modes: Scan mode- When the power Mode Indicators is turned on, the scan mode will be selected automati- cally. A mode indi- cator will appear below the word "SCAN" to show that the scan mode is selected, and a second mode indicator will show which mode is currently displayed. Note: If you have selected a different mode, repeatedly press the Mode button to rese- lect the scan mode. Speed, time, distance, or calorie mode-To select one of these modes for continuous display, repeatedly press the Mode button. The mode indicators will show which mode is selected. Make sure there is not a mode indicator below the word "SCAN." Note: The console can display speed and distance in either miles or kilometers. To change the unit of measurement, press the On/Reset button for about five seconds. The letters mph or km/h will appear in the display to show which unit of measurement is selected. When the batteries are replaced, it may be necessary to reselect the desired unit of measurement. 3. To reset the display at any time, press the On/Reset button. 4. To turn off the power, simply wait for a few minutes. The console has an "auto-off" feature. If the pedals are not moved and the console buttons are not pressed for a few minutes, the power will turn off automatically to save the batteries. 9