Weslo Pursuit 310 Cs English Manual - Page 5

Hold the Console 16 near the Handlebar 15. Insert - battery

Page 5 highlights

3. The Console (16) requires three AA batteries; alkaline batteries are recommended. Insert three batteries into the battery compartment. Make sure that the batteries are oriented as shown by the markings inside the battery compartment. 3 Batteries 16 4. Hold the Console (16) near the Handlebar (15). Insert the console wire into the indicated hole in the 4 Handlebar. Note: The console wire is longer than shown. Attach the Console (16) to the Handlebar (15) with four M4 x 16mm Screws (49). Be careful to avoid pinching the console wire. Hole 16 Console Wire 15 49 5. While another person holds the Handlebar (15) near 5 the Upright (13), insert the console wire down through the Upright. Attach the Handlebar to the Upright with three M8 x 15mm Button Screws (34) and three M8 Split Washers (42). Be careful to avoid pinching the console wire. Note: The console wire is longer than shown. Be careful to avoid pinching 49 the console wire. Be careful to avoid pinching the console wire. 34 42 34 15 Console Wire 34 42 13 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

5
3
3.
The Console (16) requires three AA batteries; alkaline
batteries are recommended. Insert three batteries into
the battery compartment.
Make sure that the batter-
ies are oriented as shown by the markings inside
the battery compartment.
16
Batteries
5.
While another person holds the Handlebar (15) near
the Upright (13), insert the console wire down through
the Upright. Attach the Handlebar to the Upright with
three M8 x 15mm Button Screws (34) and three M8
Split Washers (42).
Be careful to avoid pinching the
console wire.
Note: The console wire is longer than
shown.
15
34
42
13
42
34
34
5
Console Wire
4.
Hold the Console (16) near the Handlebar (15). Insert
the console wire into the indicated hole in the
Handlebar. Note: The console wire is longer than
shown.
Attach the Console (16) to the Handlebar (15) with four
M4 x 16mm Screws (49).
Be careful to avoid pinch-
ing the console wire.
16
4
Be careful to
avoid pinching
the console wire.
Be careful
to avoid
pinching the
console
wire.
15
49
49
Hole
Console
Wire