Weslo Pursuit 350 Bike English Manual - Page 5
Note: The Washers and the Nylon Locknuts may
View all Weslo Pursuit 350 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. Attach the Left and Right Upright Covers (14, 15) around the Frame (1) with three M4 x 25mm Self- 3 tapping Screws (41) as shown. 1 41 14 15 41 4. Attach the Seat (12) to the Seat Post (5) with four 4 M8 Washers (54) and four M8 Nylon Locknuts (10). Note: The Washers and the Nylon Locknuts may be pre-attached to the underside of the Seat. 12 10 54 10 5 54 5. Turn the Seat Knob (9) counterclockwise and remove 5 it from the Frame (1). Then, insert the Seat Post (5) into the Frame. Adjust the Seat Post to the desired height and insert the Seat Knob (9) through the indi- cated hole in the Frame into one of the adjustment holes in the Seat Post. Then, turn the Seat Knob clockwise until it is tight. Make sure the Seat Knob is firmly engaged in one of the adjustment holes in the Seat Post. Adjustment Holes 5 1 Hole 9 5