Weslo Pursuit 360r Bike English Manual - Page 6
Attach the Rear Stabilizer 6 to the Seat Frame
View all Weslo Pursuit 360r Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the information on page 5 before you begin. Turn the Front Stabilizer (2) so that the large holes are facing the Frame (1). Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 60mm Button Screws (33). 1 33 2 Large Holes 1 2. Attach the Rear Stabilizer (6) to the Seat Frame (5) with two M10 x 75mm Carriage Bolts (30) 2 and two M10 Locknuts (65). 65 65 5 6 30 3. Insert the end of the Seat Frame (5) into the 3 Frame (1). Firmly press the Frame Bushing (56) into the Frame (1). Attach the Frame Bushing to the Frame with two M4 x 5mm Self-tapping Screws (66). Then, tighten the Adjustment Knob (9) into the Frame (1). Carefully tip the exercise cycle onto its side. Attach the two Bumpers (57) to the Frame (1) with two M4 x 8mm Screws (29) and two M4 Washers (70). Then, tip the exercise cycle upright. 66 57 70 9 1 66 56 5 70 29 6