Weslo Pursuit 360r Bike English Manual - Page 8

7. Attach the Seat (12) to the Seat Brackets (14, 15) with four M6 x 35mm Button Screws (61) 7 and four M6 Washers (68). 12 14 15 68 68 68 61 61 8. While another person holds the Upright (13) in the position shown, connect the Extension Wire (52) to the Reed Switch Wire (43). Next, connect the Resistance Cable (19) to the Lower Cable (45) in the following way: • See drawing A. Pull upward on the metal bracket on the Lower Cable (45), and insert the tip of the Resistance Cable (19) into the wire clip inside the metal bracket as shown. • See drawing B. Firmly pull the Resistance Cable (19) upward and slide it into the top of the metal bracket as shown. • See drawing C. Using pliers, squeeze the prongs on the upper end of the metal bracket together. Push the excess wire and cable downward into the Frame (1), and insert the Upright (13) into the Frame. Tip: Avoid pinching the wires and cables. Attach the Upright (13) to the Frame (1) with three M8 x 20mm Button Screws (34) and three M8 Split Washers (42). 8 Avoid pinching the wires 13 19 45 1 34 42 43 52 34 42 A B Metal Bracket 19 45 C 19 Metal Bracket 45 8