Weslo Pursuit 655s Uk Manual - Page 13
M6 Nuts 47
View all Weslo Pursuit 655s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HOW TO ADJUST THE BELT The exercise cycle features a precision belt that must be kept properly adjusted. If the belt causes exces- sive noise or slips as you pedal, the belt should be checked. To do this, the left side shield must first be removed. Refer 16 to the instruc- tions on page 12 and remove the left side shield. Next, use an adjustable wrench to turn the right pedal counterclockwise and remove it. Remove the right side shield. Press down on the centre of the Belt (16) between the front and rear pulleys. There should be from 1/4" to 1" of vertical movement in the centre of the Belt. If the Belt (16) is properly adjusted, reattach the side shields and pedals. If the Belt needs to be adjusted, loosen the M8 Washer Nut (37) on each side of the Flywheel Assembly (32). To tighten the Belt, turn the two 16 M6 Nuts (47) clockwise; to loosen the Belt, 32 turn the Nuts counterclock- wise. Make sure that the Flywheel 37 47 is straight and tighten the M8 Washer Nuts (37). Reattach the side shields and pedals. 13