Weslo Pursuit 690 User Manual - Page 10
Weslo Pursuit 690 Manual
View all Weslo Pursuit 690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
SPEED, TIME, DISTANCE or CALORIE mode- Any of these modes can be individually selected and continuously displayed by repeatedly pressing the mode button. A mode indicator will show which mode has been selected. The modes are selected in the following order: SPEED, TIME, DISTANCE, CALORIE, and SCAN. PULSE mode- Plug the pulse earclip fully into the jack on the console, and attach the earclip to your left earlobe. After a Pulse Earclip Jack t1 few seconds, your heart rate will be displayed. If your heart rate is not displayed, try rubbing your earlobe and repositioning the earclip. It may be helpful to stand still briefly while measuring your pulse. Note: When you are not using the pulse mode, leave the pulse earclip plugged into the Yellow Tag console, and attach the earclip to the yellow tag on the pulse earclip wire. If the pulse earclip is removed from the console while the exercise bike is in use, factors such as static or low humidity may cause false pulse readings to be displayed on the console. 3. To reset the modes, turn the power off and then on again by pressing the on/off button twice. 4. To turn off the power, press the on/off button. Note: If the pedals are not moved and the console buttons are not pressed for four minutes, the power 10