Weslo Pursuit 895i Bike User Manual - Page 8

HOW TO USE THE PURSUIT 895i HOW TO ADJUST THE SEAT For effective exercise, the Seat (19) should be at the proper height. As you pedal, there should be a 19 slight bend in your knees when the pedals are in the lowest 20 position. To 29 adjust the Seat, first hold the Seat and 30 unscrew the Seat Knob (29). Align one of the holes in the Seat Post (20) with the hole in the Side Shield Cover (30). Insert the Seat Knob into the frame and the Seat Post, and tighten the Seat Knob into the frame. Caution: Make sure to insert the Seat Knob through one of the holes in the Seat Post; do not insert the Seat Knob under the Seat Post. HOW TO ADJUST THE PEDALLING RESISTANCE To vary the intensity of your exercise, the pedalling resis- tance can be adjusted. The resistance is controlled with the Resistance Knob (10). To 10 increase the resistance, turn the Resistance Knob clockwise; to decrease the resistance, turn the Resistance Knob counterclockwise. HOW TO APPLY AN INFORMATION DECAL TO THE CONSOLE All of the information on the console is printed in English. The included decal sheet contains the same information in five other languages. If English is not your language, find the decal on the decal sheet that is printed in your language. Next, peel the appropriate decal off the decal sheet. Apply the decal to the console in the location shown. BATTERY INSTALLATION Before the console can be operated, two "AA" batteries must be installed. If you have not installed batteries, see assembly step 3 on page 6. 8