Western Digital My Net N600 User Manual - Page 79
Using WD Print Share, Using an Auto-Connected Printer, Using the Connect Button
View all Western Digital My Net N600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
INSTALLING AND USING WD PRINT SHARE Using WD Print Share Using an Auto-Connected Printer By default, the printer is in Auto-Connected mode, which allows the computer to be connected to the printer only when you send a print job to the printer. Another user in the network can use the printer while you are disconnected. Using the Connect Button Connected mode is for both printing and scanning. Selecting the printer or scanner and clicking Connect manually connects the device to your computer for the timeout duration set in Tool > Set Timeout in the menu. Using the Connect Button With a Scanner 1. Select the scanner from the list on the WD Print Share Control Center. 2. Click Connect. The status changes to Connected. 3. Launch the software that came with your scanner. 4. After the scanning job is done, disconnect by clicking Disconnect or let the scanner disconnect automatically in the predefined time set in Tool > Set Timeout in the menu. Using the Scan Button You can also use the Scan button on the WD Print Share Control Center to activate scanning with the industry standard TWAIN or WIA interface. 1. Select the scanner from the list on the WD Print Share Control Center. 2. Click Scan. You are prompted to select a scanner interface. A scanner user interface appears on the screen. 3. Choose options and click Scan to scan your picture or document. 4. After scanning is done, click Close. MY NET ROUTERS 75 USER MANUAL