Western Digital WD800B002 User Manual (pdf) - Page 5

Recording Your USB 2.0 External Hard Drive Information In the table that follows, enter the serial number and model number listed on your new Western Digital USB 2.0 external hard drive. The complete serial number and model number are on the large label on the bottom of the drive. You will need this information for setup and technical support purposes. Serial Number: Model Number: Purchase Date: Registering Your Product Your new Western Digital USB 2.0 external hard drive includes 90 days of free technical support from the date of purchase. To be eligible for the free technical support, you must register your product with Western Digital. Take advantage of Western Digital special offers and product updates by registering your USB 2.0 external hard drive online at www.wdc.com/products/registration. Handling Precautions Western Digital USB 2.0 external hard drives are precision instruments and should be handled with care during unpacking and installation. These drives may be damaged by rough handling, shock, or vibration. Be aware of the following precautions when unpacking and installing your external hard drive: ! Do not unpack your Western Digital USB 2.0 external hard drive until you are ready to install it. ! Save all the packing materials in case you need to return your USB 2.0 external hard drive. Your warranty will be void if your returned drive is shipped in anything other than the original packaging or Western Digital supplied or approved materials. ! Do not drop or jolt the drive. ! Do not attempt to open the drive and service it yourself. Removing the cover may expose you to harmful electrical voltages and will void the warranty. ! To allow proper ventilation, do not block the air slots on the underside and rear of the enclosure. ! The Western Digital USB 2.0 external hard drive is not intended as a portable device. GETTING STARTED - 2