Western Digital WD800B002 User Manual (pdf) - Page 6

2 Connecting the USB 2.0 External Hard Drive Windows 98SE users only: You must install the device drivers on your system prior to connecting the device. Skip to page 4 for installation procedures. 1. Power on your computer. 2. Plug the end of the power connector with the flat side facing up into the power supply socket located on the back of the drive. 3. Connect the power cord (with the AC power supply connected) into an electrical outlet. Verify that the power LED is lit. 4. Connect one end of the included USB 2.0 cable into an available USB port on your computer. 5. Plug the other end of the USB 2.0 cable into the back of the external hard drive. USB 2.0 Port Power Supply Socket Power LED (green) Activity LED (red) USB Connection USB 2.0 External Hard Drive Rear and Front Panel with Installation CONNECTING THE USB 2.0 EXTERNAL HARD DRIVE - 3