Westinghouse VR4090 User Guide - Page 28
Executing Several Operations at Once Macro function
View all Westinghouse VR4090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Using Receiver Using Receiver Executing Several Operations at Once (Macro function) Executing Several Operations at Once (Macro function) By registering several steps of remote control operations beforehand, these operations can be executed with a single operation. This function is referred to as the macro function. The receiver can register up to three sets of macros. Up to 20 operation steps can be recorded for one macro. Registering a macro 1. Press and hold the MACRO key on Remote Control unit for more than 2 seconds. 2. Within 8 seconds, press the MUSIC (MACRO1), MOVIE (MACRO2) or TV (MACRO3) key. 2WAY LCD REMOTE CONTROL UNIT 3. Press the control keys in the order you want to execute them. 4. Press the MACRO key. Now the registration is complete. 5. Check the macro according to the following "Executing a macro" procedure. When there is a function which does not perform interim operation, a delay must be inserted. To insert a delay, insert a macro step for a key not related to the operation at that time (for example the STOP key during stop) etc. befor the function for which the operation is to be delayed. Press each key slowly and firmly. "Full" is displayed when the maximum number of steps have been registered. If you do not perform any operation for more than 8 seconds in the middle of registration, the registration mode is canceled and the previous registration remains without being cleared. Executing Several Operations at Once (Macro function) Example of registration: In the following example, the steps for turning the TV on, turning the VCR on, setting the TV channel and playing the VCR will be registered in Macro 2. 1. Press and hold the MACRO key on Remote Control unit for more than 2 seconds. 2. Within 8 seconds, press the MOVIE (MACRO2) key. 3. Perform registration. 1. Press the TV key. 2. Press the AV POWER key. 3. Press numeric key 2 (channel setting). 4. Press the MOVIE key. 5. Press the AV POWER key. 6. Press the 3 key. 4. Press and hold the MACRO key. Now the registration is complete. Executing a macro 1. Press the MACRO key on Remote Control unit. 2. Within 3 seconds, press the MUSIC (MACRO1), MOVIE (MACRO2) or TV (MACRO3) key. The registered macro will be executed. After macro execution, the LCD display returns to the previous condition. 44 45