Whirlpool GS563LXS Use and Care Guide - Page 16

Style 2 - Electric Oven Control The AUTO-CLEAN cycle time is adjustable, from 2 hours 30 minutes to 4 hours 30 minutes in 15-minute increments. Suggested clean times are 2 hours 30 minutes for light soil and 4 hours 30 minutes for heavy soil. The last 30 minutes of the cycle is for cool down. To Self-clean Using AUTO-CLEAN 1. Press AUTO CLEAN. 2. Press the TEMP/HOUR "up" or "down" arrow pad to set the desired self-clean cycle time. 3. Press START. The oven door will automatically lock. The "DOOR LOCKED" and "CLEAN" indicator lights will be displayed. The time remaining will also be displayed. 4. When the self-clean cycle is complete and the oven cools, the "DOOR LOCKED" and "CLEAN" indicator lights will turn off. 5. Once the oven is completely cooled, remove ash with a damp cloth. To Delay Start Self-Clean Using AUTO-CLEAN 1. Press AUTO-CLEAN. 2. Press the TEMP/HOUR "up" and "down" arrow pads to set the desired self-clean cycle time. 3. Press START TIME. 4. Press the TEMP/HOUR "up" and "down" arrow pads to set the desired start time. 5. Press START. The oven door will automatically lock. "DOOR LOCKED" and "CLEAN" indicator lights will be displayed. 6. When the self-clean cycle is complete and the oven cools, the "DOOR LOCKED" and "CLEAN" indicator lights will turn off. 7. Once the oven is completely cooled, remove ash with a damp cloth. General Cleaning IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products. Do not wipe down any of the inside surfaces until the oven has completely cooled down. Applying a cool damp cloth to the inner door glass before it has cooled completely could result in the glass breaking. METALLIC PAINT (on some models) Do not use abrasive cleaners, cleaners with bleach, rust removers, ammonia or sodium hydroxide (lye) because paint surface may stain. Soap, water and a soft cloth or sponge are suggested first unless otherwise noted. COOKTOP CONTROLS EXTERIOR PORCELAIN ENAMEL SURFACES (on some models) Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire appliance is cool. These spills may affect the finish. Cleaning Method: s Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad: Gently clean around the model and serial number plate because scrubbing may remove numbers. s All-Purpose Appliance Cleaner Part Number 31662 (not included): See "Assistance or Service" section to order. STAINLESS STEEL (on some models) To avoid damage to stainless steel surfaces, do not use soapfilled scouring pads, abrasive cleaners, Cooktop Polishing Creme, steel-wool pads, gritty washcloths or some paper towels. Rub in direction of grain to avoid damaging. Cleaning Method: s Stainless Steel Cleaner & Polish Part Number 31462 (not included): See "Assistance or Service" section to order. s Liquid detergent or all-purpose cleaner: Rinse with clean water and dry with soft, lint-free cloth. s Vinegar for hard water spots. Do not use steel wool, abrasive cleansers or oven cleaner. Do not soak knobs. When replacing knobs, make sure knobs are in the Off position. On some models, do not remove seals under knobs. Cleaning Method: s Soap and water or dishwasher: Pull knobs straight away from control panel to remove. CONTROL PANEL Do not use abrasive cleaners, steel-wool pads, gritty washcloths or some paper towels. Damage may occur. Cleaning Method: s Glass cleaner and soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on panel. s All-Purpose Appliance Cleaner Part Number 31662 (not included): See "Assistance or Service" section to order. PORCELAIN-COATED GRATES AND CAPS Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the cooktop, grates and caps are cool. These spills may affect the finish. To avoid chipping, do not bang grates and caps against each other or hard surfaces such as cast iron cookware. Do not reassemble caps on burners while wet. Do not clean in the Self-Cleaning cycle. 16