Whirlpool WDF550SAAB Installation Guide - Page 3
Location Requirements - dishwasher
View all Whirlpool WDF550SAAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Parts Supplied Check that all parts are included. See separate parts list for accessories available for your dishwasher. Product Dimensions Side View * 24" (61 cm)* A B A. #8 x ⁵⁄₈" Phillips flat-head wood screws B. Phillips color-matched toekick screws Location Requirements IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or electrical shock. Proper installation is your responsibility. ■ Contact a qualified installer to ensure that the dishwasher is installed to meet all electrical and plumbing national and local codes and ordinances. ■ Install the dishwasher as specified in these instructions. ■ Have everything you need to properly install dishwasher. ■ Protect dishwasher and water lines leading to dishwasher against freezing. Damage from freezing is not covered by the warranty. ■ This dishwasher is manufactured for indoor use only. ■ Install and level dishwasher on a floor that will hold the weight, and in an area suitable for its size and use. ■ Install dishwasher in a location with easy access to water, electricity and drain. ■ Fully enclosed on both sides, back, and top. Minimum Clearances NOTES: ■ Corner locations require 2" (5.1 cm) minimum clearance between the side of the dishwasher door and the wall or cabinet. ■ A minimum of 25⁵⁄₈" (65.1 cm) is required in front of the dishwasher to allow the door to open fully. ■ Opening should be square, and the floor should be level. 32¹⁄₂" to 34¹⁄₂" (82.6 to 87.6 cm) 16 5/8"(42.2 cm) * To front of door frame Rear View 2 ¹⁄₂" (6.2 cm) 23 5/9"(59.8cm) C B A D A. 2" (5.1 cm) minimum clearance for door opening B. Dishwasher C. Countertop D. 25⁵⁄₈" (65.1 cm) minimum 3