Whirlpool WDP370PAHW Installation Guide - Page 5

Attach faucet adapter - internal threads 8. Connect hose to faucet Thick washer Thin washer Screens Faucet adapter Insert the 2 screens, the thin washer, and then the thick washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet. NOTE: Use both washers. Connecting to Water and Electrical Supply Run water at the faucet until it is hot. Turn off the water. 7. Check hose connection Pull down on the locking collar while lifting the hose connector onto the faucet adapter. When the connector snaps into place, release the locking collar. Turn the hot water on slowly until it is all the way on. Pull the hoses out of their storage compartment on the back of the dishwasher. NOTE: Make sure the hoses are not kinked or twisted. Kinked hoses reduce washing performance. 9. Plug into a grounded 3 prong outlet. 5