Whirlpool WDP370PAHW Installation Guide - Page 6
Adjust water temperature, DISCONNECT DISHWASHER, Disconnect hose from faucet, Disconnect dishwasher
View all Whirlpool WDP370PAHW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Using the Faucet You can draw water from the faucet while the dishwasher is connected. NOTE: Do not draw water while the dishwasher is filling or while water is being pumped out. (This helps avoid a low fill when dishwasher is filling or keeping drain water from mixing with fresh water when dishwasher is draining.) 10. Adjust water temperature 12. Disconnect dishwasher Press the red button on the hose connector to draw water from the faucet. (The faucet is set on hot. Adjust the faucet for the water temperature you want.) NOTE: Turn the hot water back on after you draw water from the faucet. Turn off the cold water. DISCONNECT DISHWASHER Turn off the hot water. (This can be done after the last rinse.) 11. Disconnect hose from faucet Unplug the power supply cord and return it to the storage compartment. Return the hoses to the storage compartment. Vacation or Extended Time without Use To Reduce Risk of Property Damage During Vacation or Extended Time Without Use ■■ When you will not be using the dishwasher during the summer months, turn off the water and power supply to the dishwasher. ■■ Make sure the water supply lines are protected against freezing conditions. Ice formations in the supply lines can increase water pressure and cause damage to your dishwasher or home. Damage from freezing is not covered by the warranty. ■■ When storing your dishwasher in the winter, avoid water damage by having your dishwasher winterized by authorized service personnel. Press the red button on the connector to release the water pressure. Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector. Empty any remaining water from the connector by turning the connector upside down. 6