Whirlpool WDT730HAM Owners Manual - Page 20
Direct Wire Connection, Check door clearance, Check inner spacing, Remove terminal box cover
View all Whirlpool WDT730HAM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
47. Check door clearance 51. Route cable into terminal box IMPORTANT: Check that top of door does not contact screws, brackets, or countertop. If it does, adjust leveling legs or use the side attachment option. 48. Check inner spacing Route cable so that it does not touch dishwasher motor or lower part of dishwasher tub. Pull cable through UL-listed/ CSA-approved strain relief in terminal box. Strain relief is not supplied with the dishwasher. Owner must purchase a 7/8" (22 mm) screw-in type strain relief. Select UL-listed/CSA-approved twist-on wire connectors (not included) rated to connect your household wiring to 16-gauge dishwasher wiring. WARNING Open door and check that space between dishwasher cabinet opening and tub is equal on both sides. If spacing is not equal, loosen bracket screws and shift tub. Tighten bracket screws. Direct Wire Connection 49. Remove terminal box cover Electrical Shock Hazard Electrically ground appliance. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 52. Direct wire - connect ground wire B A Using a 1/4" hex-head socket, nut driver, or Torx® T20® screwdriver, remove terminal box cover. Retain for later use. 50. Install strain relief A. Ground wire B. Ground screw Form bare ground wire into a U-shaped hook. Wrap ground wire hook clockwise around the ground connector screw and under the washer. Securely tighten ground connector screw. Install a UL-listed/CSA-approved metallic strain relief. 20