Whirlpool WDT730HAMZ Installation Instructions - Page 5
INSTALLATION REQUIREMENTS, Tools and Parts
View all Whirlpool WDT730HAMZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Cleaning Instructions IMPORTANT: Do not use wire brush, scouring pad, etc., as they may damage the filters. Rinse filter under running water until most soils are removed. If you have hard-to-remove soils or calcium deposits from hard water, a soft brush may be required. Measuring tape or ruler 5/8" (16 mm) open-end wrench L O C K P USH DOWN & TURN L UN O CK INSTALLATION REQUIREMENTS Tools and Parts Gather the recommended tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed: 10" (254 mm) adjustable wrench that opens to 11/8" (29 mm) Torx®† T20® and, if installing custom front panels, Torx® T15® screwdrivers Other Useful Items You May Need: Pliers Flat-blade screwdriver Flashlight Shallow pan Phillips screwdriver Utility knife Bath towel Masking or duct tape 5/16" (8 mm) and 1/4" (6.35 mm) nut drivers or hex sockets Small level †®TORX, T20 and T15 are registred trademarks of Acument Intellectual Properties, LLC. 5