Whirlpool WED6600WL Use and Care Guide - Page 22

Steam Cycles Use Steam Cycles to help smooth out wrinkles from dry items, such as clothes that have been worn or clothes that have been left in the dryer too long. When a Steam Cycle is selected, the estimated time remaining display shows the actual time remaining in the cycle. NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free finish may yield better results than those without. Use of a fabric softener sheet is not recommended with steam cycles as it may cause temporary staining on the clothes. Quick Refresh This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits, and synthetic garments. In this cycle a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief cool down. The heat level and cycle time are not adjustable. Enhanced Touch Up This cycle is best for touching up clothes that have been left in the dryer too long. In this cycle, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief cool down. The dry time and temperature can be adjusted for this cycle. NOTE: Overloading the dryer may not yield the same results. Steam Preset Cycle Settings Timed Cycles Load Type Default Temperature* QUICK REFRESH Helps to smooth out wrinkles and reduce odors from loads consisting of one to four dry items. Medium ENHANCED TOUCH UP Helps to smooth out wrinkles in loads left in the dryer for an extended period. Medium Default Time (Minutes)* 15 20 *Temperature and Time Adjust are selectable only for the Enhanced Touch Up Cycle. NOTE: The Enhanced Touch Up cycle has a minimum dry time of 15 minutes and a maximum dry time of 40 minutes. Only the Medium and High temperature settings can be used for the Enhanced Touch Up cycle. Timed Cycles Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing the Time Adjust up or down arrows. See "Changing Cycles, Modifiers, and Options." NOTE: Timed Cycles may also be used with the drying rack. See "Drying Rack." Timed Dry Use this cycle to complete drying if items are still damp after an Automatic Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting. Timed Preset Cycle Settings Timed Cycle Load Type Default Temperature Default Time (Minutes) TIMED DRY High 40 Heavyweight, bulky items, work clothes Modifiers Automatic Cycle Modifiers Use the Dryness Modifier to select dryness levels for the Auto Dry Cycles. Press DRYNESS until the desired Dryness setting illuminates. The preset dryness setting is Normal when an Automatic Cycle is selected. You can select a different dryness level, depending on your load, by pressing Dryness and choosing More, Normal, Less, or Damp. Selecting More, Normal, Less, or Damp automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle. NOTE: Dryness Level selections cannot be used with the Timed Cycles. Timed Cycle Modifiers Use the Temperature Modifier to select temperatures for the Timed Cycles. Press TEMP until the desired temperature setting illuminates. NOTE: Temperature modifiers cannot be used with the Auto Dry Cycles. 22