Whirlpool WEL98HEBU Use & Care Guide - Page 10

4. Select the desired cycle NORMAL CASUAL BULKY ITEMS DELICATE Eco Auto Cycles TIMED DRY JEANS HEAVY DUTY QUICK DRY Manual Cycles SPECIALTY CYCLES TOWELS ENHANCED TOUCH UP MY CYCLE QUICK REFRESH Steam Cycles Select number of Garments Select the desired cycle for your load. See the "Cycle Guide" or the display for more information about each cycle. If selecting Timed Dry, use LCD control buttons to adjust the length of the cycle. 5. Set any cycle settings Changing the Auto Cycle settings to increase drying time If all your loads on all Auto Cycles are consistently not as dry as you would like, you may change the default settings to increase the default dryness level. Your automatic drying settings can be adjusted to adapt to different installations, environmental conditions, or personal preference. This change is saved in memory and will affect all of your Automatic cycles, not just the current cycle/load. There are 3 drying settings: Factory preset dryness level. Slightly drier clothes, 15% more drying time. Much drier clothes, 30% more drying time. To change the drying settings: NOTE: The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode (the power button is off) to adjust the default settings. The default cycle settings will be displayed on the LCD screen. You may adjust different settings, depending on whether you have selected an Auto Cycle, Manual Cycle, or Steam Cycle. See the "Cycle Guide" for detailed information. NOTE: Not all options and settings are available with all cycles. Not all cycles are on all models. Auto Cycles: You can select a different dryness level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle. Automatic cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. Manual Cycles: When you select a Manual Cycle, the default time is displayed. Use the LCD control buttons to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments. The default temperature may be changed by pressing the Temperature button until the desired dry temperature is selected. Quick Refresh with Steam: Select the number of garments in the load. The dryer will automatically set the drying time and temperature. 10 1. Before starting an Auto cycle, press and hold the LCD control button for Dryness Level for 6 seconds. The LCD will briefly display the regular Dryness Level options, then change to show the default setting options. 2. Press the LCD control button for the desired setting. 3. Press the BACK button to return to the main screen for the selected cycle. 6. Select any additional options (options vary by model) Add additional options such as Static Reduce, Smart Grid, Wrinkle Shield™ with Steam, and/or EcoBoost™ by pressing the button for that option. NOTE: n Not all options and settings are available with all cycles, and not all features and cycles are available on all models. n On model WEL98 only, see the "Smart Feature Sheet" for information about setting up Smart functionality, turning it on and off, receiving important notifications, and taking advantage of available features.