Whirlpool WEL98HEBU Use & Care Guide - Page 8
Cycle Guide - Steam Cycles, Cycle Guide - Manual Cycles
View all Whirlpool WEL98HEBU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CYCLE GUIDE - MANUAL CYCLES Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Adjusting drying time on Manual Cycles When you select a Manual Cycle, the default time appears in the display. Use the LCD controls to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments. The maximum dry time is 100 minutes. Selecting the Drying Temperature A High heat setting may be used for drying heavyweight items such as towels and work clothes. A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits. Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics. Line dry bonded or laminated fabrics. NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions. Items to dry: Drying Default Available Cycle: Temperature: Time: Options: Small loads and Quick Dry High 13 sportswear Medium-High Medium Low Extra Low Air Only Wrinkle Shield™† Any load Timed Dry NOTE: Select Air Only to dry foam, rubber, plastic, or heat-sensitive fabrics. High 40 Wrinkle Shield™† Medium-High Medium Low Extra Low Air Only Cycle Details: For small loads of 3-4 items. Use to dry items to a damp level for items that do not require an entire drying cycle, or to finish drying slightly damp items. Select a drying temperature based on the type of fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting. † Wrinkle Shield™ with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings. CYCLE GUIDE - STEAM CYCLES Your dryer has been connected directly to the water line with a hose behind the dryer. This is used for bringing in water for the steam cycles. Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle. Steam cycles are designed for use with dry loads to loosen wrinkles, remove odors, and refresh fabrics. Items to refresh: Drying Default Available Cycle: Temperature: Time: Options: Shirts, blouses, Quick Refresh Medium-High 12 Wrinkle Shield™† and slacks with Steam Static Reduce Mixed Loads Enhanced High 22 Wrinkle Shield™† Touch Up Medium-High Static Reduce Medium Cycle Details: Use to remove odors and reduce light wrinkles. Select the number of garments to be refreshed (on some models). Do not add dryer sheets. Use to remove wrinkles, including from loads left in the dryer too long. Dry time will automatically adjust when the load size is sensed. Cycle run time cannot be manually adjusted, but Temperature is selectable. Do not add dryer sheets. † Wrinkle Shield™ with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings. Load Size Recommendations For best results, follow the wet load size recommendations noted for each cycle. Medium load: Fill the dryer drum up to about 1/2 full. Small load: Fill the dryer drum with 3-4 items, not more than 1/4 full. 8 Large load: Fill the dryer drum up to about 3/4 full. Do not overload. Items need to tumble freely.