Whirlpool WET4024HW Instrucciones de instalacion - Page 11
Electrical Requirements - Canada
View all Whirlpool WET4024HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Electrical Requirements - Canada It is your responsibility: ■■To contact a qualified electrical installer. ■■To be sure that the electrical connection is adequate and in conformance with Canadian Electrical Code, C22.1 - latest edition and all local codes. A copy of above codes standard may be obtained from: Canadian Standards Association, 178 Rexdale Blvd., Toronto, ON M9W 1R3 CANADA. ■■To supply the required 4-wire, single-phase, 120/240 volt, 60 Hz, AC-only electrical supply on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit. ■■This dryer is equipped with a CSA International Certified Power Cord intended to be plugged into a standard 14-30R wall receptacle. The cord is 5 ft. (1.52 m) long. Be sure wall receptacle is within reach of dryer's final location. 4-wire receptacle (14-30R) If using a replacement power supply cord, it is recommended that you use Power Supply Cord Replacement Part Number 9831317. For further information, please reference service numbers located in "Assistance or Service" section of your Use and Care Guide. 11