Whirlpool WET4024HW Instrucciones de instalacion - Page 5
Parts needed, Alternate parts, If you have, You will need, Optional equipment - installation
View all Whirlpool WET4024HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Parts needed: (Not supplied with washer/dryer) n Vent clamps n Vent elbows and ductwork Inlet hoses with flat washers Check local codes, electrical supply and venting, and read "Electrical Requirements" and "Venting Requirements" before purchasing parts. Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your washer/dryer. For further information, please reference the "Assistance or Service" section of the Washer/Dryer Use and Care Guide. Optional equipment: (Not supplied with washer/dryer) Refer to your Use and Care Guide for information about accessories available for your washer/dryer. Alternate parts: (Not supplied with washer/dryer) Your installation may require additional parts. To order, please refer to toll-free numbers on back page of your Use and Care Guide. If you have: You will need: Overhead sewer Standard 20 gal. (76 L) 39" (991 mm) tall Drain Tub or Utility Sink, Sump Pump and Connectors (available from local plumbing suppliers) Floor drain Siphon Break Part Number 285320, Additional Drain Hose Part Number 285702, and Connector Kit Part Number 285442 1" (25 mm) standpipe 2" (51 mm) diameter to 1" (25 mm) diameter Standpipe Adapter Part Number 3363920, Connector Kit Part Number 285835 Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) Drain hose too short Extension Drain Hose Part Number 285863, Connector Kit Part Number 285835 Lint clogged drain Drain Protector Part Number 367031, Connector Kit Part Number 285835 Water faucets beyond reach of fill hoses 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314, 10 ft (3.0 m) Part Number 350008 5