Whirlpool WFE975H0HZ Owners Manual - Page 7
Electronic Oven Controls, To Deactivate the Energy Save Mode
View all Whirlpool WFE975H0HZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
KEYPAD PROOF FEATURE Proofing bread RAPID PREHEAT Rapid oven preheating AQUALIFT SELF CLEAN Clean cycle INSTRUCTIONS 1. Place prepared dough in oven. Press PROOF. 2. Press the Start keypad. 3. Let the dough rise until nearly doubled in size. Proofing time may vary depending on dough type and quantity. 4. Press the Cancel keypad when finished proofing. Refer to the "Proofing Bread section for more information. Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to off, but it can be changed to on. 1. Press RAPID PREHEAT. 2. The current setting will be displayed. 3. Press 1 to adjust the setting. 4. Press the Start or Cancel keypad to exit and display the time of day. IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat. If preheating for the Bake cycle has already started, Rapid Preheat may be started directly by pressing RAPID PREHEAT. See the "Clean Cycle" section. REMOTE ENABLE Enable remote app control Press REMOTE ENABLE to enable the ability to utilize the Whirlpool app. CONNECT Connect to Wi-Fi Press and hold CONNECT while your router's WPS indicator light is blinking to connect your range to your Wi-Fi network. See the "Connectivity Setup" section for more detailed instructions. Electronic Oven Controls Control Display The display will flash when powered up or after a power loss. Press the Cancel keypad to clear. When the oven is not in use, the time of day is displayed. If the range is in Energy Save mode, the display will be blank when not in use. Tones Tones are audible signals, indicating the following: One Tone ■■ Valid keypad press ■■ Oven is preheated (long tone) ■■ Function has been entered ■■ Reminder, repeating each minute after the end-of-cycle tones Three Tones ■■ Invalid keypad press Four Tones ■■ End of cycle Use Settings to change the tone settings. Energy Save The Energy Save mode puts the range into Sleep mode and reduces energy consumption. To Activate the Energy Save Mode: 1. Press SETTINGS until "Energy saver on." appears on the display. 2. Press 1 to enable. To Deactivate the Energy Save Mode: 1. Press SETTINGS until "Energy saver off." appears on the display. 2. Press 1 to disable. Clock The Clock can use a 12- or 24-hour cycle. 1. Press the Clock keypad. 2. Press 1 for automatic setup or 2 for manual setup. 3. Press 3 for AM or 6 for PM. 4. Use the number keypad to set the time of day. 5. Press the Start keypad to save the setting. Settings Many features of the oven control can be adjusted to meet your personal needs. These changes are made using the Settings keypad. Use Settings to scroll through the features that can be changed. Each press of the Settings will advance the display to the next setting. After selecting the feature to be changed, the control will prompt you for the required input. Press the Start or Cancel keypads to exit and display the time of day. Details of all of the feature changes are explained in the following sections. Press the Cancel keypad to exit Settings. Fahrenheit and Celsius The temperature is preset to Fahrenheit but can be changed to Celsius. 1. Press SETTINGS until "TEMP UNIT" is displayed. 2. The current setting will be displayed. 3. Press 1 to adjust the setting. 4. Press the Start or Cancel keypads to exit and display the time of day. 7