Whirlpool WFW9150WW Owners Manual - Page 14

Pausing or Restarting, Changing Cycles and Options, Status Lights, Cycles - beeping

Page 14 highlights

Pausing or Restarting 1. To pause the washer at any time, press START/PAUSE. 2. To continue the cycle, press and hold START/PAUSE (for approximately 1 second). Changing Cycles and Options Not all Options are available with all Cycles. Cycles and Options can be changed anytime before START/ PAUSE is pressed. To cancel a cycle 1. Press POWER. 2. The washer powers down, the door unlocks, and clothes can be removed. NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks. To change Options after the cycle has started 1. Press START/PAUSE once. 2. Press the desired OPTIONS. If the option is not available, the machine will beep. 3. Press and hold START/PAUSE (for approximately 1 second) to continue the cycle. NOTE: Press and hold TUMBLEFRESH option button (approx. 1 second) to add periodic tumbling. See "Options" for complete cycle description. The light will glow when selected and will remain flashing for up to 6 hours or until the washer is stopped by either pressing POWER or opening the door. To drain the washer manually 1. Press START/PAUSE. 2. Press RINSE/DRAIN & SPIN. 3. Deselect EXTRA RINSE Option. 4. Press and hold START/PAUSE (for approximately 1 second) to begin the drain. 5. When the spin is complete, the door unlocks. Items can be removed from the washer. Status Lights These lights show which portion of the cycle the washer is operating. They also indicate when you can add an additional item to the wash cycle and when the controls are locked. Adding items You can add items to the washer after the wash cycle has started, if the Add a Garment status light is illuminated. All cycles have this feature except Rinse/Drain & Spin, and Clean Washer with AFFRESH™ cycle. To add items 1. Press START/PAUSE. The washer door unlocks, and items can be added. 2. To continue the cycle, close the door and press and hold START/PAUSE (for approximately 1 second). NOTE: To add garments after the Add a Garment period is over, the wash cycle needs to be canceled, the items added, and a new wash cycle started. Done The Done light comes on after the cycle is complete. The light will stay on until door is opened. Locking controls The Control Lock avoids unintended use of the washer. You can also use the control lock feature to avoid unintended cycle or option changes during a cycle. When Control Lock is illuminated, all buttons are disabled except for START/PAUSE and POWER. You can lock the controls while the washer is operating. To lock the controls Press and hold TUMBLEFRESH™ option for 3 seconds. The Control Lock status light illuminates. To unlock the controls Press and hold TUMBLEFRESH™ option for 3 seconds until the CONTROL LOCK Status light turns off. Door Lock When the status light illuminates, the door is locked. The door is locked and unlocked automatically, depending on the stage of the wash cycle. Cycles Wash Cycles Choose Wash Cycles by rotating the Cycle selector knob to the desired cycle. Each cycle is designed for different types of fabric and soil levels. ■ Each cycle has a preset cycle time, TEMP, SPIN SPEED, and may have preset Options. The preset settings provide the recommended fabric care for the selected cycle. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

14
Pausing or Restarting
1.
To pause the washer at any time, press START/PAUSE.
2.
To continue the cycle, press and hold START/PAUSE (for
approximately 1 second).
Changing Cycles and Options
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START/
PAUSE is pressed.
To cancel a cycle
1.
Press POWER.
2.
The washer powers down, the door unlocks, and clothes can
be removed.
NOTE:
If the water level or the temperature is too high, the washer
will drain automatically before the door unlocks.
To change Options after the cycle has starte
d
1.
Press START/PAUSE once.
2.
Press the desired OPTIONS. If the option is not available, the
machine will beep.
3.
Press and hold START/PAUSE (for approximately 1 second) to
continue the cycle.
NOTE:
Press and hold TUMBLEFRESH option button (approx. 1
second) to add periodic tumbling.
See “Options” for complete
cycle description. The light will glow when selected and will
remain flashing for up to 6 hours or until the washer is stopped by
either pressing POWER or opening the door.
To
d
rain the washer manually
1.
Press START/PAUSE.
2.
Press RINSE/DRAIN & SPIN.
3.
Deselect EXTRA RINSE Option.
4.
Press and hold START/PAUSE (for approximately 1 second) to
begin the drain.
5.
When the spin is complete, the door unlocks. Items can be
removed from the washer.
Status Lights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional item
to the wash cycle and when the controls are locked.
A
dd
ing items
You can add items to the washer after the wash cycle has started,
if the Add a Garment status light is illuminated. All cycles have this
feature except Rinse/Drain & Spin, and
Clean Washer with
AFFRESH™ cycle.
To a
dd
items
1.
Press START/PAUSE. The washer door unlocks, and items
can be added.
2.
To continue the cycle, close the door and press and hold
START/PAUSE (for approximately 1 second).
NOTE:
To add garments after the Add a Garment period is over,
the wash cycle needs to be canceled, the items added, and a new
wash cycle started.
Done
The Done light comes on after the cycle is complete. The light will
stay on until door is opened.
Locking controls
The Control Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When Control Lock is illuminated,
all buttons are disabled except for START/PAUSE and POWER.
You can lock the controls while the washer is operating.
To lock the controls
Press and hold TUMBLEFRESH™ option for 3 seconds.
The Control Lock status light illuminates.
To unlock the controls
Press and hold TUMBLEFRESH™ option for 3 seconds until the
CONTROL LOCK Status light turns off.
Door Lock
When the status light illuminates, the door is locked. The door is
locked and unlocked automatically, depending on the stage of the
wash cycle.
Cycles
Wash Cycles
Choose Wash Cycles by rotating the Cycle selector knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels.
Each cycle has a preset cycle time, TEMP, SPIN SPEED, and
may have preset Options. The preset settings provide the
recommended fabric care for the selected cycle.