Whirlpool WFW9600TA Use and Care Guide - Page 14
Pausing or Restarting, Changing Cycles, Options, and Modifiers
UPC - 883049065908
View all Whirlpool WFW9600TA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
High Efficiency "HE" detergent compartment (Letter D in Dispenser Illustration) Add liquid or powdered HE detergent to this compartment for your wash cycle. The detergent type selector (A) must always be in the correct position for the detergent type used. Slide the detergent type selector to the correct position. IMPORTANT: If you are using the Delay Wash option, powdered detergent should be used in the compartment since liquid detergents may seep out of the compartment, before the wash begins. Use the detergent manufacturer's recommended amount for load size. Liquid detergent: A Selector in position for liquid detergent A. Detergent type selector Powdered detergent: A Selector in position for powdered detergent A. Detergent type selector Chlorine bleach compartment (Letter E in Dispenser Illustration) Add no more than 2⁄3 cup (160 mL) liquid chlorine bleach to this compartment. The bleach will be automatically diluted and dispensed at the best time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach. Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not guess. Follow the manufacturer's directions for proper use. Do not fill beyond the "MAX" level. NOTE: Overfilling could cause garment damage. At the end of the cycle, a small amount of water may be left in the dispenser. This is normal. Fabric softener compartment (Letter F in Dispenser Illustration) Pour measured liquid fabric softener into the fabric softener dispenser, if desired. Do not overfill. The dispenser holds 1⁄4 cup (60 mL). The fabric softener is dispensed in the rinse cycle. If Extra Rinse is selected, the fabric softener will be dispensed during the Extra Rinse. Do not use fabric softener dispensing balls in this washer. Dispensing balls will not operate correctly with this washer. Do not spill or drip any fabric softener onto the clothes. At the end of the cycle, a small amount of water may be left in the dispenser. This is normal. NOTE: Use only liquid fabric softener in this dispenser. Pausing or Restarting 1. To pause the washer at any time, press PAUSE/CANCEL. 2. To continue the cycle, press START (for approximately 1 second). Changing Cycles, Options, and Modifiers Not all Options and Modifiers are available with all cycles. Available modifiers will glow amber. If an option or modifier is unavailable with a selected cycle, the light will not illuminate. Cycles, Options, and Modifiers can be changed anytime before START is selected. To cancel a cycle and select a new cycle 1. Press PAUSE/CANCEL twice. 2. Press POWER. 3. Select desired cycle. 4. Select the desired Options or modifiers such as Water Temp, Spin Speed, and Soil Level. 5. Press START (for approximately 1 second) to restart the washer at the beginning of the new cycle. To cancel a cycle 1. Press PAUSE/CANCEL twice. 2. The washer powers down, the door unlocks, and clothes can be removed. NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks. To change Options or Modifiers after the cycle has started 1. Press PAUSE/CANCEL once. 2. Select the desired Options or modifiers such as Water Temp, Spin Speed, and Soil Level. Available selections will glow amber. 3. Press START (for approximately 1 second) to continue the cycle. 14