Whirlpool WFW9600TA Use and Care Guide - Page 4

Installation Requirements - parts

Page 4 highlights

INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. The parts supplied are in the washer drum. Tools needed for connecting the water inlet hoses Pliers (that open to 19⁄16" [39.5 mm]) Flashlight (optional) Tools needed for installation Open end wrenches 17 mm and 13 mm Level Wood block Ruler or measuring tape Parts supplied: A B Options Pedestal You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (25.4 cm) or a 15.5" (39.4 cm) pedestal. These pedestals will add to the total height of the washer for a total height of approximately 48" (121.9 cm) or 53.5" (135.9 cm), respectively. C D A. Drain hose form B. Inlet hose (2) C. Inlet hose washer (4) E D. Transport bolt hole plug (4) E. Beaded strap Alternate Parts Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the "Assistance or Service" section. If You Have You Will Need to Buy Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Floor drain Siphon break, Part Number 285834; additional drain hose Part Number 8318155; and connector kit, Part Number 285835 Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863 Water faucets 2 longer water fill hoses: beyond reach of fill 6 ft (1.8 m) Part Number 76314, hoses 10 ft (3.0 m) Part Number 350008 A B A. 10" (25.4 cm) pedestal B. 15.5" (39.4 cm) pedestal To order, call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section. Pedestal Height Color Part Number 10" (25.4 cm) White WHP1000SQ 10" (25.4 cm) Black WHP1000SB 10" (25.4 cm) Diamond Dust (Silver) WHP1000SU 15.5" (39.4 cm) White XHP1550VW 15.5" (39.4 cm) Black XHP1550VB 15.5" (39.4 cm) Diamond Dust (Silver) XHP1550VU 15.5" (39.4 cm) New Aspen (Green) XHP1550VA 15.5" (39.4 cm) Tuscan Chestnut XHP1550VC 15.5" (39.4 cm) 15.5" (39.4 cm) 15.5" (39.4 cm) Ocean Sapphire Metallic Red Oxide XHP1550VE XHP1550VF XHP1550VJ 15.5" (39.4 cm) 15.5" (39.4 cm) Emerald Green Burgundy XHP1550VP XHP1550VM Stack Kit Are you planning to stack your washer and dryer? To do so you will need to purchase a Stack Kit. To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Ask for Part Number 8541503. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
Pliers (that open to 1
" [39.5 mm])
Flashlight (optional)
Tools needed for installation
Open end wrenches 17 mm and 13 mm
Level
Wood block
Ruler or measuring tape
Parts supplied:
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the “Assistance or Service” section.
Options
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a
15.5" (39.4 cm) pedestal. These pedestals will add to the total
height of the washer for a total height of approximately
48" (121.9 cm) or 53.5" (135.9 cm), respectively.
To order, call the dealer from whom you purchased your washer
or refer to the “Assistance or Service” section.
Stack Kit
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the “Assistance or Service” section. Ask for Part
Number 8541503.
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
E. Beaded strap
If You Have
You Will Need to Buy
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose
Part
Number
8318155; and connector kit,
Part Number 285835
Drain hose too
short
4 ft (1.2 m) drain hose extension kit,
Part Number 285863
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
B
A
C
D
E
A. 10" (25.4 cm) pedestal
B. 15.5" (39.4 cm) pedestal
Pedestal
Height
r
e
b
m
u
N
t
r
a
P
r
o
l
o
C
A
B
10" (25.4 cm)
White
WHP1000SQ
15.5" (39.4 cm)
White
XHP1550VW
15.5" (39.4 cm)
Tuscan Chestnut
XHP1550VC
10" (25.4 cm)
Black
WHP1000SB
10" (25.4 cm)
Diamond Dust (Silver)
WHP1000SU
15.5" (39.4 cm)
Black
XHP1550VB
15.5" (39.4 cm)
Diamond Dust (Silver)
XHP1550VU
15.5" (39.4 cm)
New Aspen (Green)
XHP1550VA
15.5" (39.4 cm)
Ocean Sapphire
XHP1550VE
15.5" (39.4 cm)
Burgundy
XHP1550VM
15.5" (39.4 cm)
Metallic Red
XHP1550VF
15.5" (39.4 cm)
Oxide
XHP1550VJ
15.5" (39.4 cm)
Emerald Green
XHP1550VP
9
/
16