Whirlpool WTW5100VQ Installation Instructions - Page 2

INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. The parts supplied are in the washer basket. Parts needed (not provided with washer): Alternate Parts Your installation may require additional parts. For information on ordering, please refer to the toll-free phone numbers on the front page of the Washer User Instructions. I Inlet hoses I Flat washers If You Have: You Will Need to Buy: To order: I Call the dealer from whom you purchased your washer. I Reference the toll-free number on the front page of the Washer User Instructions. I Visit the website on the front page of the Washer User Instructions. NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference. Parts supplied: Laundry tub or standpipe taller than 96" (2.4 m) 1" (2.5 cm) diameter standpipe Overhead sewer Sump pump system (if not already available) 11⁄4" (3.2 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 280130 Standard 20 gal. (76 L) 39" (99 cm) tall drain tub or utility sink, sump pump, and connectors (available from local plumbing suppliers) Floor drain Siphon break kit, Part Number 280129; additional drain hose, Part Number 3357090 A B C A. Beaded tie strap B. Front leveling feet with nuts (2) C. Drain hose form Tools needed for installation: I Adjustable or open end wrench 9⁄16" (14 mm) I Level I Wood block I Ruler or measuring tape I Pliers that open to 19⁄16" (3.95 cm) I Flashlight (optional) Water faucets beyond reach of ll hoses Water ll hoses: 10 ft (3.0 m) Black EPDM, Part Number 8212656RP 6 ft (1.8 m) Braided Nylon with 90° Elbow, Part Number 8212638RP 5 ft (1.5 m) Braided Nylon, Part Number 8212487RP 6 ft (1.8 m) Black EPDM with 90° Elbow, Part Number 8212637RP 5 ft (1.5 m) Red & Blue EPDM, Part Number 8212545RP 5 ft (1.5 m) Black EPDM, Part Number 8212641RP 4 ft (1.2 m) Black EPDM, Part Number 8212546RP Drain hose too short Kit Part Number 280131 Lint clogged drain Drain protector, Part Number 367031 2