Xerox 3130 User Guide - Page 19
Understanding the Control Panel, On Line/Error() and Toner Save() LEDs, On Line/Error, and Toner - toner cartridges
UPC - 095205611984
View all Xerox 3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Understanding the Control Panel On Line/Error( ) and Toner Save( ) LEDs LED Description If the lights green, the printer is ready to print. If the lights red, the printer is experiencing an error, such as jammed paper, the open cover or the empty toner cartridge. See "Troubleshooting Error Messages" on page 6.18. If you press the button while the printer is receiving data, the LED blinks red to cancel printing. In Manual Feed mode, if there is no paper in the Manual Feeder, the LED blinks red. Load paper into the Manual Feeder and the LED stops blinking. If the printer is receiving data, the green. LED slowly blinks If the printer is printing the received data, the LED blinks green fast. If you press the button in Ready mode, this LED is on and the Toner Save mode is enabled. If you press this button once again, this LED is off and the Toner Save mode is disabled. 1.6 INTRODUCTION