Xerox 3130 User Guide - Page 28
with the print side facing down, If you want to change the paper size in the tray, see
UPC - 095205611984
View all Xerox 3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4 Load paper with the print side facing down. 2 Make sure that all four corners are flat in the tray. 5 Pay attention to the paper limit mark on the left inside wall of the tray. Paper overloading may cause paper jams. Note: If you want to change the paper size in the tray, see ""Changing the Paper Size in the Tray" on page 2.8". 6 Slide the tray back into the printer. SETTING UP YOUR PRINTER 2.7
S
ETTING
U
P
Y
OUR
P
RINTER
2.
7
2
4
Load paper
with the print side facing down
.
Make sure that all four corners are flat in the tray.
5
Pay attention to the paper limit mark on the left inside wall
of the tray. Paper overloading may cause paper jams.
Note:
If you want to change the paper size in the tray, see
““Changing the Paper Size in the Tray” on page 2.8”.
6
Slide the tray back into the printer.