Xerox 5500/YB User Guide - Page 218

Front Panel Messages Error or Warning Messages (Continued) Message Jam At Tray 5; Remove Tray To Clear (Jam C4-4) Jam At Tray 6; Slide Out Tray 6 Feeder And Open Door J To Clear (Jam C5-1, C5-2, C8-5) Maintenance Kit Is Near End Of Life Manual Feed [size*] [type*] No Paper in Tray [2 | 3 | 4 | 5 | 6]. Non-Xerox Drum Cartridge Non-Xerox Toner Cartridge Description 1. Remove Tray 5. 2. Remove the jammed paper. 3. Reinsert Tray 5. 1. Lift Tray 1 (MPT). 2. Slide the Tray 6 feeder away from the printer. 3. Open Door J and lift the handle inside. 4. Remove the jammed paper. 5. Close the access handle and Door J. 6. Slide in Tray 6 feeder. 7. Lower Tray 1 (MPT). The Maintenance Kit (Fuser, Transfer Roller, and feed rollers) is near the end of its life. Warning - when the Fuser is replaced, use caution, some components inside Door A may be hot. Order replacement P/N 115R00033 if the printer is powered by 110V or P/N 115R00034 if powered by 220V. The print job has requested manual feeding. 1. Remove all paper from Tray 1 (MPT). 2. Load paper of the indicated size and type into Tray 1 (MPT). Load paper in the indicated tray. The Drum Cartridge is not a genuine Xerox product. Any damage caused by non- Xerox consumables will not be covered under the printer warranty. Status reporting is reduced. Only Standard Print Quality is supported. Warning - Use caution, some components inside Door A may be hot. 1. Open Door A. 2. Open the Printer Front Door. 3. Lift the Drum Cartridge latch and remove the cartridge. 4. Replace with P/N 113R00670. 5. Close Door A. 6. Close the Printer Front Door. The Toner Cartridge is not a genuine Xerox product. Any damage caused by non- Xerox consumables will not be covered under the printer warranty. Status reporting is reduced. Only Standard Print Quality is supported. 1. Open the Printer Front Door. 2. Pull out the Toner Cartridge. 3. Replace with P/N 113R00668. 4. Close the Printer Front Door. Phaser® 5500 Laser Printer 4-65