Xerox 6180N Getting Started v3.7 - Page 9

2. DocuSP 3.7.xx new features The following is a list of the features and functions now available in the DocuSP Version 3.7.xx software. For customers upgrading from an earlier version, this list details the enhancements available to you in this version of the software. For detailed information on each of these new features, refer to the DocuSP Help system or contact your Xerox customer trainer. All DocuSP-based products Security ¨ With DocuSP 3.7.xx, the System Administrator can adjust the system security in the Security Setup window. Previously a Xerox representative performed this change. Default setup upon installation is a security setting of High. Refer to the System Guide for details on the security settings and what each means. A change in the security setting requires a complete Shutdown and reboot of the DocuSP controller. A security setting of High disables connectivity to the DocuSP controller using ftp and telnet. Some client applications, such as DigiPath, may not be able to communicate with the DocuSP controller with a security setting of High. Set the Security setting to Medium to allow DigiPath and other client applications to communicate correctly with the DocuSP controller. The scripts for enabling or disabling portions of the security are still available. Refer to the System Guide for details on the scripts. NOTE: Once a script is run, the setting is permanent until the disabling script is run or the Security setting in the DocuSP UI is toggled from Medium to High. For example, the security is set to High, but the enable-ftp script is run. FTP is no enabled until the disable-ftp script is run, or until the security setting is toggled to medium and then back to high. The DocuSP controller needs to be rebooted after the toggle from high to medium to high is complete. XEROX DOCUMENT SERVICES PLATFORM SERIES 2-1 GETTING STARTED