Xerox 6280DN User Guide - Page 97
USB Setup, System Setup - toner for
UPC - 095205747119
View all Xerox 6280DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Description of Menu Items USB Setup Use USB Setup for setting the USB port's status. Item Port Status Adobe Protocol Description Select either Enable or Disable. Specifies the PostScript communication protocol: Standard, BCP, TBCP, Binary, or Auto. System Setup System Setup menu is used to make the printer operation settings, such as for alarm and power saver mode. Item Description PowerSaver Timer Audio Tones Fault Time-Out Time-Out Specify the transitional time to Power Saver between 5 and 60 minutes in increments of 1 minute. • 5 min. to 60 min. (default: 30 min.) • For details, refer to Power Saver Mode on page 27 Specifies whether to turn on the alarm when an error occurs in the printer. You cannot adjust the sound volume. • Control Panel (default: Off) • Invalid Key (default: Off) • Machine Ready (default: Off) • Job Complete (default: Off) • Fault Tone (default: Off) • Alert Tone (default: Off) • Out of Paper (default: Off) • Low Toner Alert (default: Off) • Base Tone (default: Off) Sets the fault time-out function. You can cancel a printing process when it goes beyond a set time period. Set the time until the print job is canceled. When this timeout expires, the print job is canceled. • 5 sec. to 300 sec. (default: 30 sec.) Specifies the amount of time in increments of 1 second the printer waits for additional data before it cancels the job. • Off Cannot cancel. Phaser® 6280 Printer 98