Xerox 7300DN Features Guide - Page 14

Driver Features Phaser® 7300 Color Printer Print-quality modes You can choose between different print quality modes to obtain the best combination of speed and print quality for your job. Print-quality mode Standard I General purpose mode for high-speed color printing I Produces crisp, bright prints I Suitable for most office documents and images I Prints at 600 x 600 dpi Enhanced I Highest-quality color prints I Richest color and near-photographic detail I Prints at 600 x 2400 dpi Draft I Lighter toner usage than standard mode I Recommended for draft or interim prints and proofreading only I Prints at 600 x 600 dpi Maximum speed for letter and A4 size paper* Plain paper: I 30 ppm color I 37 ppm black-and-white Specialty papers: I 10 ppm color I 15 ppm black-and-white Plain paper I Up to 16 ppm color Plain paper: I 30 ppm color I 37 ppm black-and-white Specialty papers: I 10 ppm color I 15 ppm black-and-white * Approximate number of pages per minute (ppm) does not include I/O or image processing time. Two-sided (duplex) printing has a slower speed. Specify the print-quality mode in a supported driver: I Windows 95 / Windows 98 / Windows Me PostScript driver: On the Setup tab, select a print quality by moving the slider. I Windows NT / Windows 2000 / Windows XP PostScript driver: On the Paper/Quality tab, select a print quality by moving the slider. I MacOS 8 / MacOS 9 driver: In the Print dialog box, click on General, select Print Quality from the pull-down menu, then select the desired mode for Quality. I MacOS X (version 10.1 and higher) driver: In the Print dialog box, select the Printer Features pull-down menu, then select the Print Quality/Color tab. Select the desired mode for Quality. Copyright © 2002 Xerox Corporation. All Rights Reserved. 9