Xerox 7300DN Features Guide - Page 15

Driver Features TekColor™ color corrections You can select a color correction to match particular press specifications or match your computer screen's colors. Otherwise, select Automatic to let the printer automatically pick the best color correction for elements in your document. Color correction Automatic sRGB Display sRGB Vivid None SWOP Press Euroscale Press Commercial Press SNAP Press Black and White Use Printer Front Panel Setting Description I Automatically optimizes the color correction for each element (text, graphics, and photographs) on the page. I Closely approximates the colors on a standard display screen. I Produces the brightest possible colors. I Does not use a color correction so the colors you specified in the application for your job are not altered. I Use when you have specified colors from the Phaser® 7300 PANTONE® Color Chart, available at www.xerox.com. I Matches U.S. press standards using the Specification for Web Offset Publications. I Emulates the Euroscale 4-color process press mode. I Emulates a 4-color process commercial press mode. Use this selection for general 4-color process Process PANTONE® Color matching. I Matches the standards for printing on uncoated and newsprint papers using the Specifications for Non-heat Advertising Printing. I Produces a black-and-white version of a document. I Colors converted to grayscale. I Use to print page masters for photocopying in black-and-white. I Use when one of the color toner cartridges is empty. I Use the color correction set in the printer. I The color correction can be set in the printer using the front panel or using CentreWare (if available). Specify the color correction in a supported driver: I Windows 95 / Windows 98/Windows Me PostScript driver: On the TekColor tab, select the desired color correction. Some of the color corrections are grouped under Office Color or Press Match Color. I Windows NT / Windows 2000 / Windows XP PostScript driver: On the TekColor tab, select the desired color correction. Some of the color corrections are grouped under Office Color or Press Match Color. I MMacOS 8 / MacOS 9 driver: In the Print dialog box, click on General, select TekColor from the pull-down menu, then select the desired correction for Color. I MacOS X (version 10.1 and higher) driver: In the Print dialog box, select the Printer Features pull-down menu, then select the Print Quality/Color tab. Select the desired mode for Color Correction. Note When one of the color toner cartridges runs out while printing, you can cancel the color print job and resubmit it as a Black and White print job. Phaser® 7300 Color Printer 10