Xerox 750DP 5750 User Guide - Page 74
General printing problems
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
CC-2 Troubleshooting General printing problems If this happens: The DocuColor doesn't appear in the Macintosh Chooser list of printers You cannot connect to a DocuColor from a utility chooser You cannot open the DocuColor with the Chooser in a Windows utility Try this: 1. On the Macintosh, make sure that the correct zone is selected and that AppleTalk is active. AppleTalk must be active. The DocuColor may be in a different zone from the one that's selected. (If your network doesn't have zones, this is not applicable.) Print the Configuration page from the Control Panel to view the correct AppleTalk zone. 2. Does the DocuColor appear in the Chooser on another Macintosh on the same network? If another Macintosh computer is nearby, check to see if the DocuColor appears in the Chooser on that Macintosh. If the DocuColor is visible from one Macintosh computer, but not from another, there may be a problem with the way the second Macintosh computer is connected to the network. Check all the cabling and other connections, and verify that the network is properly terminated. If there is a 10BaseT transceiver on the network, make sure that its green link integrity light is on. For more information about the network, refer to the documentation provided with the network hardware. 3. Do other printers on the network appear in the Chooser? If your network includes printers other than the DocuColor, they should appear in the Chooser. If none of the printers appear in the Chooser list, there is most likely a problem with the way the Macintosh computer is connected to the network. Check all the cabling and other connections. For more information about the network, refer to the documentation provided with the network hardware. If other printers appear in the Chooser, there may be a problem with the DocuColor connection. Contact your DocuColor system administrator. 4. Try printing a test page by pressing the Menu button and choosing Print Pages/Test Page from the Control Panel. If you're able to print the test page, but DocuColor still does not appear in the Chooser, contact your authorized service/support center. • Make sure that no one is calibrating the DocuColor. If someone is running AutoCal on the DocuColor, you can select it in the Chooser, but you cannot connect to it. This insures that only one person is calibrating the server at any time and that print jobs do not use unexpected calibration. • Is your NET_WSCK.INI file set up correctly? This file must be set up for Windows 95 and Windows NT printing with TCP/IP or IPX/SPX. See Getting Started for instructions.
![](/manual_guide/products/xerox-750dp-5750-user-guide-467b3b5/74.png)