Xerox 750DP 5750 Error Codes List - Page 23
Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Status Code 08-165 Description/Direction The control logic sensed a timing problem from the TC (Transfer Corotron) Jam Sensor. Initial action: Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner. Clean the TC (Transfer Corotron) Jam Sensor. Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth (water) (REP 5.22) (REP 5.24). Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10). Check that there is no paper tacked to the Drum. If the problem still exists: Place a service call. 08-167 The control logic sensed a timing problem from the Misstrip Sensor On Check. Initial action: Ensure that there is no paper jammed at the CTR (Charged Transfer Roll) Cleaner. Clean the TC (Transfer Corotron) Jam Sensor. Clean Tray 1, 2, 3 or 4 Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth (water) (REP 5.22) (REP 5.24). Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10). Check for excessive wear, damage or proper installation of the Stripper Finger. Check for a broken or arcing Transfer Corotron (TC) wire (REP 5.17). If the problem still exists: Place a service call. 5750 DocuCare Service Manual 5/98 2-23 Fault Code Procedures