Xerox 750DP 5750 Error Codes List - Page 39

Status Code 15-380, 381, 382, 383, 384, 385 Description/Direction The control logic sensed a failure of the AGC (Automatic Gain Control). Initial action: Verify that the platen glass has not been damaged and/or has been properly installed. If the problem still exists: Switch off the machine power. If there is other equipment close by that may be generating electrical noise or radio frequency interference, power it off also. Contact Building Maintenance and have them verify the proper voltage at the machine plug. Clean and inspect all corotrons for defects and ensure they are properly installed. Power the machine on. If the problem still exists: Place a service call. 15-386, 387, 388, 389, 390, 391 The control logic sensed a failure of the AOC (Automatic Offset Control). Initial action: Switch off the machine power. If there is other equipment close by that may be generating electrical noise or radio frequency interference, power it off also. Contact Building Maintenance and have them verify the proper voltage at the machine plug. Clean and inspect all corotrons for defects and ensure they are properly installed. Power the machine on. If the problem still exists: Place a service call. 5750 DocuCare Service Manual 5/98 2-39 Fault Code Procedures