Xerox 750DP 5750 Error Codes List - Page 28
Reset NVM6060 to 0.
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Status Code 09-365, 366, 367, 368 Description/Direction The control logic sensed a failure of one of the toner dispensing systems. Yellow (09-365), Magenta (09-366), Cyan (09-367), or Black (09-368). Initial action: Remove the corresponding toner cartridge and check for caking of the toner or blockage of the opening. Verify that there is adequate toner in the cartridge. If the problem still exists: Place a service call. 09-376 The control logic sensed that the Waste Toner Sump is full. Initial action: Refer to proceedure (REP 5.5) to clean the waste toner sump. Reset NVM6060 to 0. If the problem still exists: Place a service call. 09-620 The control logic sensed a failure of the ADC sensor setup. Initial action: Check the drum surface for damage or deformities (REP 5.4). If the problem still exists: Place a service call. Fault Code Procedures 5/98 2-28 5750 DocuCare Service Manual