Xerox 750DP DocuColor Server Administrator Guide - Page 39

22-13 Network Setup options Network Setup Port Setup Enable Source Routing Yes/No [Yes] Select Yes if your network supports source routing. Source Routing Request All Route Yes/No [Yes] This option appears only if you enabled Source Routing. Select Yes if you want the Request packet to travel to its destination by all routes. Source Routing Respond All Route Yes/No [No] This option appears only if you answered No to the previous option. Select Yes if you want the Response packet to return by all routes to the originating computer. Parallel Port Setup options You must enable the parallel port in order to enter the Parallel Port Setup options and print to the parallel port. Parallel Port Setup Enable Parallel Port No/Yes [No] Select Yes if you want to print through the parallel port. You can connect a single PC-compatible computer to the parallel port and print directly to the DocuColor. NOTE: Enabling the parallel port does not conflict with using Ethernet or Token Ring communication with the DocuColor. Port Timeout in Seconds 5-60 [5] This option appears only if Enable Parallel Port is set to Yes. Your setting determines how long the DocuColor waits without receiving data from the parallel port before deciding that the current job is complete. Until the timeout, the DocuColor cannot receive new jobs through the parallel port, but it can continue to receive network print jobs.