Xerox 750DP DocuColor Server Administrator Guide - Page 67
Calibrate, Canceling calibration., Guide., User Guide.
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
22-41 Color Setup options When you choose Calibration from the main Setup menu, the following menu is displayed: Exit Calibration Set Up Calibration Calibrate Remove Calibration Calibration 8. Choose Setup Calibration, and choose a tray. You must use Letter/A4 size paper, but you can choose whether you want the paper to feed from a paper tray or via Bypass (manual feed). For more information, see the User Guide. 9. Choose Calibrate, and perform calibration as described below. For more information, see the User Guide. Calibrate Calibration options are summarized below. See the User Guide for calibration procedures and a fuller explanation of calibration options. You can print a Configuration page at the server to find out when the DocuColor was last calibrated. The Start page also contains this information. (To print a Configuration page from a DocuColor at Idle status, press the Menu button to display the Functions screen, scroll down to select Print Pages, and select Configuration.) Canceling calibration. If any problems arise during calibration, press the Menu button to escape to the Calibration menu. Select Target Copier Target/Linear [Copier Target] The Copier Target calibrates the DocuColor to its defined optimums. The linear target calibrates the DocuColor to a generic standard. Using the Copier Target is strongly recommended. Print Measurement Page Yes/No [Yes] Choose this option to print a page of known color data for measurement. You are notified that the copier is printing a measurement page without calibration. The copier prints a page of graduated colors that you place on the copier glass.
![](/manual_guide/products/xerox-750dp-docucolor-server-administrator-guide-70c735b/67.png)