Xerox 750DP DocuColor Server Getting Started Guide - Page 55
The TCP/IP Protocol and Microsoft TCP/IP printing services must already be, The DocuColor reboots.
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
44 Installing user software on a Windows computer Completing the Windows NT 4.0 TCP/IP connection Complete the setup for the TCP/IP and lpr connection as follows: • Prepare the DocuColor to accept print jobs using TCP/IP and lpr protocols. • Configure the workstation for the TCP/IP connection. Before you continue, ask the system administrator for the IP address assigned to the DocuColor, as well as the subnet mask and the gateway address, if they are used. TO PREPARE THE DOCUCOLOR FOR TCP/IP AND LPR PRINTING: 1. With the DocuColor turned off, connect it to the network. 2. Turn on the DocuColor and from the Control Panel, select PRINTER SETUP. Confirm that one of the queues is enabled. 3. Select NETWORK SETUP. Enable TCP/IP and enter the appropriate settings for IP address, subnet mask and gateway address. For details, see the Administrator Guide. 4. Exit NETWORK SETUP and save changes. The DocuColor reboots. The TCP/IP Protocol and Microsoft TCP/IP printing services must already be installed on the Windows NT workstation.
![](/manual_guide/products/xerox-750dp-docucolor-server-getting-started-guide-9907ac6/55.png)