Xerox 8860MFP Advanced Features Guide - Page 63
Setting the Duration for the Tray 2-N Prompt, System, Address, Properties, General, System Defaults
![]() |
UPC - 095205735574
View all Xerox 8860MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Printer Settings Setting the Duration for the Tray 2-N Prompt The Tray 2-N prompt setting specifies the amount of time the prompt displays on the control panel after paper is loaded in Trays 2-N. The Tray 2-N prompt requests the user to confirm the current tray setup or to specify the correct paper type for the print job. Setting Behavior None (Default) Turns the tray setup prompt off. 30 seconds Infinite Displays the tray setup prompt for 30 seconds after paper is loaded in Trays 2-N. Displays the tray setup prompt after paper is loaded in Trays 2-N until a selection is made on the control panel. To select a duration setting for Tray 2-N prompts, use one of the following options: ■ The printer's control panel ■ CentreWare IS Using the Control Panel To select the Tray 2-N prompt setting on the control panel: 1. Press the System button. 2. Select Paper Tray Setup, and then press the OK button. 3. Select Tray 2-N Prompt, and then press the OK button. 4. Select the appropriate duration, and then press the OK button. Using CentreWare IS To select the Tray 2-N prompt setting using CentreWare IS: 1. Launch your web browser. 2. Enter the printer's IP address in the browser's Address field. 3. Click Properties. 4. Select General on the left navigation panel, and then select System Defaults. 5. Select the appropriate prompt setting in the Tray 2-N Prompt drop-down list. 6. Click the Save Changes button at the bottom of the page. Phaser® 8560MFP/8860MFP Multifunction Printer 4-13
![](/manual_guide/products/xerox-8860mfp-advanced-features-guide-9afec48/63.png)