Xerox XA7-17I User Manual - Page 12
Introduction, Connecting Your LCD Monitor to a Computer
View all Xerox XA7-17I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2 Installation Installation ENGLISH Refer to the owner's manual of the computer for connections. In the process of connecting external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting Your LCD Monitor to a Computer Method 1: Analog (D-SUB) Connection 1 Turn off the computer and unplug the power cable. 2 Fit the DVI-I to D-SUB adapter onto the signal cable of the LCD monitor. 3 Connect the signal cable to the D-SUB port on the back of the computer. 4 Connect the AC power cable to the power socket on the back of the monitor. 5 Plug the computer and monitor power cables into a nearby outlet. 6 Press the POWER/ button on the front panel of the LCD monitor to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections. 2 Attach the DVI-I to D-SUB adapter 4 5 Connect to wall outlet Xerox© LCD Monitor User's Manual 3 Connect to the D-SUB port 11