Xerox XA7-17I User Manual - Page 13
Method 2: DigitalDVI Connection, SELECT, DIGITAL INPUT, POWER
![]() |
View all Xerox XA7-17I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Method 2: Digital(DVI) Connection 1 Turn off the computer and unplug the power cable. 2 Connect the signal cable (DVI-I) to the DVI port on the back of the computer. 3 Connect the AC power cable to the power socket on the back of the monitor. 4 Plug the computer and monitor power cables into a nearby outlet. 5 Press the POWER/ button on the front panel of the LCD monitor to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections. 3 4 Connect to wall outlet 2 Connect to the DVI port If the screen displays "out of range", please follow the instructions below to set up: • Press the MENU button to display the OSD. • Press the UP or DOWN button to highight the (INPUT SELECT) icon, then press the MENU button. The OSD displays: 12 12 DIGITAL INPUT • Press the UP or DOWN button to select DIGITAL INPUT. 12 Xerox© LCD Monitor User's Manual
![](/manual_guide/products/xerox-xa717i-user-manual-4e446e1/13.png)