Xerox XCARD-SCAN User Manual - Page 16

LED pattern 3 blinks 4 blinks 5 blinks Continuous Scanner status Scanner not linked-the scanner does not detect a storage device. Make sure a USB flash drive or memory card is fully inserted into the back of the scanner. Power cycle the scanner if needed. Calibration error-the scanner needs to be calibrated or the scanner failed to calibrate successfully during a calibration routine. Re-start the calibration routine by press, hold-down for 2 seconds, then release the function button. Please see Calibrating Your Scanner on page 54. Timeout-the scanner timeout has started. Scanner busy-either the scanner is scanning, saving files to the attached device, or it is being calibrated. • Scan functions-The icon represents the color mode and file format for the scanned image. Scans in color at 300dpi and creates a JPG (*.jpg) file. Scans in black & white at 300dpi and creates an Adobe PDF (*.pdf) file. Scans in color at 300dpi and creates an Adobe PDF (*.pdf) file. • Battery LED-This light indicates the scanner's power status. Off On Blink The scanner is not plugged in, the battery is not in the scanner, or the scanner is turned off. The scanner power is on. The battery power is getting low and needs to be recharged. USB cable port-Connect the provided USB cable to charge the scanner. When connected to a computer, you can transfer images from the USB flash drive or memory card. USB flash drive port-Insert a USB flash drive into this port to scan directly to the flash drive. Memory card slot-Insert an SD memory card into this slot to scan directly to a memory card. Battery compartment-Holds the rechargeable battery that powers the scanner. Glass release button-Separates the glass and rollers inside the scanner so that you can clean the scanner using the cleaning swab. 16 Xerox Mobile Scanner User's Guide