Xerox XCARD-SCAN User Manual - Page 17
Xerox XCARD-SCAN Manual
![]() |
View all Xerox XCARD-SCAN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Insert the Battery The battery comes pre-installed in the scanner's battery compartment. Open the battery compartment, on the underside of the scanner, and pull out the Mylar strip. Close the battery compartment and proceed with charging the scanner. If the battery is not pre-installed in your unit, or if you need to replace the battery for any reason, please follow these instructions for installing the battery. Warning: Only use the battery model provided with the scanner (NP120 for 3.7V 1700mAh). 1. Open the battery cover on the underside of the scanner. 2. Insert the battery into the compartment. Make sure the battery is inserted in the correct position. 3. Lower the compartment lid and slide the lid in place to lock it. Xerox Mobile Scanner User's Guide 17
![](/manual_guide/products/xerox-xcardscan-user-manual-3e34b50/17.png)